This heavy duty commercial slide gate operator is equipped with a powerful, quiet, brushless DC motor, which operates on 24 volt DC power. In addition, this gate operator is built with a long-
The BLSL3060 is the first choice for heavy duty commercial slide gate applications because of its many features. First, this full feature, state-
The brushless DC motor does not need brushes replaced like conventional DC operators, so it is practically trouble free! Due to these inherent characteristics, the brushless DC motor lasts up to 10 time longer than the conventional brushed DC motor. A brushless DC motor’s typical life expectancy is 10,000 to 20,000 working hours, compared to the conventional DC motor that has a life expectancy between 2,000 to 5,000 working hours.
The operator is also equipped with a built-
This operator is designed to operate in any climate:
1) It does not require a gearbox or a battery heater to operate in above -
2) Temperatures -
The optional chain routing under the sprocket is for extra chain clearance for non-
These unique engineering innovations are backed by the safety and reliability of the most advanced control board in the industry to ensure a smooth operation for any Platinum Access Systems operator.
Features and Benefits:
1. Continuous duty
2. Two 12V, 33Ah Lead Acid batteries. That is more than enough power to run the gate
till the AC power come back.
3. Capacity: Max Gate Weight is 3000Ibs and Max Gate Length is 60 ft.
4. Heavy Duty size 70 gearbox. Heavy Duty size 50 chain.
5. Corrosion resistant Powder Coated heavy duty steel chassis.
6. Soft start and soft stop to minimize wear and tear on the gate system.
7. Dynamic Speed Control – No speed variation when gate load changes, or power
switches between AC and battery. Slide gate works on slope without coasting.
8. Automatic Learning with Self Sync – Automatically synchronizes gates with different
travel times for primary/Secondary gate installation.
9. Solid State Motor Drive for quiet and long last operation.
10. Advance Maglock Control-
works at both gate open and close position.
11. Individual Alarm for Primary/Secondary Installation-
operator, automatically indicate the obstructed gate.
12. Solar Priority Power Supply – With a larger solar panel, the gate will run on the solar
panel instead of the batteries when the sun light is sufficient, saving battery life.
13. High Efficiency, trouble free, very quiet, and powerful Brushless DC Motor – For smooth,
high torque, and maintenance free operation.
14. Solid State Motor Drivers – For quiet and long lasting operation.
15. Motor Brake and Maglock Release by FIRE/KEY Input -
16. One Controlled Power Supply Output for Photo Beam Detector-
Turn off PBD when the gate is closed to save battery life.
17. Adjustable Leaf Delay-
18. Fail Safe/Secure Capability-
19. Electronic reversing sensor built into control board.
20. Adjust delay timer from 0-
21. Very reliable Power surge protection design.
22. Alarm reset button.
23. Weatherproof polyethylene cover with access door.
28. Back Drivable by turning the Motor breaker OFF.
29. 10 year warranty on the motor (Residential)/8 year warranty on the motor (commercial).
30. Working temperature is from -
31. Stackable Limit Switches – For additional features.
32. Dual Output Loop Detector Rack – Type “B” relays on the loop detector can be used for additional features.
33. High Capacity DC Back-
35. Residential parts warranty: 8 years
36. Commercial parts warranty: 6 years
37. Idler pulley warranty: 3 years
38. Battery (as the main power source)warranty: 2 year
39. Battery (used with solar panel power source) warranty: 6 months
|Trouble shooting Procedure|
|Operator Quick Installation Sheet|
|Platinum and UL, or ETL Approved External Sensors|
|BLGOC-2200 Safety Device Connection|
|GOC-4000 Safety Device Connection|
|Download APP For Android Phone|
|Photo Eye Installation Procedure|
|Reflector Photo Eye Installation|
|PA2000 Series Phone Manual|